Assembling - Makita PC5001C Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Skirt section (Spiral bevel gear 35A, Ball bearings, Spindle) (cont.)
DISASSEMBLING
(2) Remove the damaged Ball bearing 6202DDW as illustrated in Fig. 8.
Note: Disassembling Spindle section causes a damage to Ball bearing 6202DDW. Therefore, do not reassemble the removed
Ball bearing 6202DDW. Replace it with the fresh Ball bearing 6202DDW.
Figs. 8
Remove Bearing retainer 39 by
removing three M3x6 Pan head
screws.
M3x6 Pan
head screw
(3pcs.)

ASSEMBLING

(1) Assemble Skirt section as illustrated in Fig. 9.
Figs. 9
Put Flat washer 15 on Ball bearing 6202DDW,
then assemble Ball bearing 6202DDW to Skirt
with Arbor press and 1R029.
Flat
washer 15
Ball bearing
6202DDW
Stand Spindle on 1R034.
Spindle Labyrinth ring
1R034
Bearing
retainer 39
1R029
Insert Spindle in place by applying 1R029 to Spiral bevel gear 35A and
pressing down using Arbor press.
Note: Do not deform Labyrinth ring on Spindle.
Remove Ball bearing 6202DDW and Flat washer 19
with Arbor press from the opposite side of Bearing
retainer 39.
Secure Ball bearing 6202DDW
with Bearing retainer 39.
M3x6 Pan head
Bearing
screw (3pcs.)
retainer 39
1R029
Spiral bevel
gear 35A
P 6/ 9
Flat washer 15
Ball bearing
6202DDW
Make sure that O ring 48 is
assembled to Skirt complete.
O ring 48
Spindle