Table of Contents
Advertisement
down before removing the rear cover. Potential hazards include the battery and hot surfaces.
When placing the covers on the NAS, make certain that:
The front cover is secured by snapping the latches into place (this is to prevent users/operators from
accessing service areas).
The rear cover is screwed into place with the original screws.
Equipment handling precau ons
Observe all conventional ESD precautions when handling 8-bay Rackmount NAS internal components. Avoid
contact with backplane components, module components, etc.
Drives are fragile and must be handled with care during removal/replacement.
Data security
Any loss, corruption, or destruction of data while using a Seagate drive or a Seagate drive system is the sole
responsibility of the user, and under no circumstances will Seagate be held liable for the recovery or
restoration of this data. To help prevent the loss of your data, Seagate highly recommends that you keep
TWO copies of your data: one copy on your NAS; and, a second copy on one of the following:
Direct-attached storage (DAS)
A second NAS
Some form of removable storage or archival media
Important info:1GB = 1,000,000,000 bytes. 1TB = 1,000,000,000,000 bytes. Once formatted, the
actual available storage capacity varies depending upon the operating environment (typically 10-
15% less).
Seagate 8-Bay Rackmo unt NAS
2/17/16
16
Advertisement
Table of Contents
