Se ng Up
The Seagate 8-bay Rackmount NAS is shipped with the following installation components:
Rack rail kit for a standard 19-inch rack
Cable management arm kit
Hard drives (the amount of disks will vary by model)
Seagate 8-bay Rackmount NAS chassis
The instructions are also available in the Quick Start Guide included with the NAS.
Step 1 - Rack
1. Attach the inner rack rails to the Seagate 8-Bay Rackmount NAS using four screws on each side.
2. Unlock the rear screws on the outer rack rails to extend the sliding brackets.
Seagate 8-Bay Rackmo unt NAS
2/17/16
29