Table of Contents
Advertisement
4. Insert the replacement PSU into the empty PSU slot.
Replace a hard drive
If a failed hard drive is under warranty, make certain to contact Seagate customer support to receive a
replacement disk.
When adding or replacing hard drives, consider using Seagate hard drives that are optimized for use with
your 8-bay Rackmount NAS. See
Important info:
Replace a faulty drive with a drive of equal or greater capacity.
When handling drives, make sure that they are placed (and stored) on a cushioned surface.
Important info: When following the instructions below, make certain to place the new or
replacement disk on the drive guides before connecting the ends to the SATA ports. Attaching
the drive to the SATA ports before placing it on the guides will damage the SATA connections.
1. Power down the system, unplug the power supply, and remove the cover as described above.
2. Push the disk's lock button to open the latch.
Seagate 8-Bay Rackmo unt NAS
Seagate Enterprise Drives
for further information.
2/17/16
53
Advertisement
Table of Contents
