Opera on
Powering on the NAS
Caution:Do not operate the NAS until the ambient temperature is within the specified operating
range (see
had time to acclimatize before operating them.
1. Before powering on the NAS, make sure that all the modules are firmly seated in their bays.
2. Make certain that the NAS power supplies are connected to compatible powered outlets.
3. Press the NAS's on/off button.
4. The LEDs on the front panel will turn blue when the NAS's power button is pressed and the disk drives
should spin.
Powering off the NAS
1. Make certain the NAS is not being accessed by users on the network.
2. Use NAS OS to turn the NAS off or, apply a short push on the power button.
Seagate 8-Bay Rackmo unt NAS
Safety
Guidelines). If the drives have been recently installed, make sure they have
2/17/16
45