5. Insert the replacement battery into the battery socket.
6. Connect the extension card support to the extension card and fasten its screws.
7. Replace the rear cover and connect the power supply cables.
8. Power on the NAS.
Make certain to dispose of used batteries according to the applicable laws for your region.
RAM
Adding a DIMM (RAM) to an empty slot
1. Power off the NAS, unplug the power supply, and remove the cover as described above.
2. Locate an empty DIMM slot and press its retaining clips outward.
Seagate 8-Bay Rackmo unt NAS
2/17/16
66