Table of Contents
Advertisement
When an Unrecoverable Missing Dot Occurs
When 1 dot of unrecoverable missing dot is detected with the Post-Printing Verification Settings for the
printer driver set to the High Reliability Mode /Economy Mode for Low Print Volume /Anti-missing Read
Mode, the printer becomes in fatal error status. To continue printing, turn off and on the printer and
change the mode to the Missing Dot Acceptable Print Mode.
Missing dots check detects an unrecoverable missing dot.
The operator turns off and on the printer.
The printer starts up in the Missing Dot Acceptable Print Mode
In the Missing Dot Acceptable Print Mode, it takes long to complete printing because missing dots
check is performed after printing each page. The EPSON Status Monitor 3 appears each time of
printing until the missing dot error is resolved. (The window may not appear depending on the printer
driver version.)
In the Missing Dot Acceptable Print Mode, EPSON Status Monitor 3 is displayed even if
[Use EPSON Status Monitor 3] is not selected in [Driver Preferences] from the [Driver
Utilities] tab.
When 2 or more dots of unrecoverable missing dot is detected in the Missing Dot
Acceptable Print Mode, maintenance is requested and the printer needs repair.
A fatal occurs
(page
Chapter 1 Overview and Basic Operations
59)
1
21
Advertisement
Table of Contents
