Sample Program
Refer to TM-C3400 sample program to develop the application using this printer.
The sample programs are initially installed.
They can be used from [Start] - [All Programs] - [EPSON] - [EPSON TM-C3400 Sample
Program].
❏ Conditions to using TM-C3400 sample program
• Use Die-cut Label (108
• Change settings to [Detect Margin Between Labels] on [Media position detection Setting] of the
printer driver.
• Languages of C++, C#, VB.NET are provided for the TM-C3400 sample program.
• The TM-C3400 sample program cannot be used for other printers than this printer.
❏ Structure of TM-C3400 sample program
The following is the structure, model and language to use for TM-C3400 sample program.
Level
Program name
Step 1 Printing characters
Step 2 Printing bar codes
Step 3 Printing bit map data
Basic
Step 4 Requesting the printer
status from the application
Step 5 Notifying the printer
status from the printer to the
application
Complete basic features
Monitoring the printer status
and controlling print jobs
Changing the print settings
with DEVMODE
Applic
ation
Obtaining various printer
information
Obtaining the print
completion
×
174.8 mm).
Support
-
-
-
-
-
-
-
Chapter 6 Application Development Information
Description
Basic print program.
(Language:C++, VB.NET)
Sets barcode font to use in advance for print
program
(Language:C++, VB.NET)
Includes bit map data
(Language:C++, C#, VB.NET, VB6.0)
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
Not supported in TM-C3400-LT.
6
137