Basic Operations
This section describes the basic operation methods of the product that can be used by an operator
and the general operations of the product.
Power On/Off
Power On
When the power is turned on, the power lamp will light up, Windows will start and a screen will be
displayed, and the power of the printer will turn on.
❏ Press the power switch.
The printer can also be network booted from another PC that is connected via LAN.
Power Off
When the power is turned off, the printer's power off sequence will be executed, Windows will be shut
down, and the power will turn off.
❏ Press the power switch.
❏ Windows will be shut down.
To prevent operation errors, the button can be set so that it cannot be used to turn off the
Do not turn off the power using the commercial circuit breaker. The printer's power off
If the power is cut off due to an outage, etc., turn on/off the power of the product after the
power.
This can be set in [Start]-[Control Panel]-[Power Options]-[Advanced]-[Power buttons].
sequence will not be executed and the ink may become clogged.
power is restored.
Chapter 1 Overview and Basic Operations
1
25