Table of Contents
Advertisement
Paper type
Form
Backing paper width
Label width
Label length
Gap between labels
Edge cutoff on left/right side
Label edge R
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Roll paper core
External diameter
Winding direction
Do not use the paper with a hole or cutout.
when using this type of paper, the label end and the black mark end of the black mark
200
Fine Media Label
Roll paper
30 to 112 mm
25.4 to 108 mm
25.4 to 1117.6 mm
(For the label length of 15 to less than 25.4 mm, use paper whose
outer edges are removed only on the right and left.)
3 to 6 mm
2 0.5 mm
2 mm or less
13 mm or more
5 mm or more
8.5 1 mm
15 to 1117.6 mm
0.145 mm
Outside diameter: 56.8 mm
Maximum 101.6 mm
Printing face must be facing outside.
position on the die-cut label must be matched.
Advertisement
Table of Contents
