Safety; Safety And Instructional Decals - Toro 38805 Operator's Manual

Safety

This machine meets or exceeds the B71.3 specifications
of the American National Standards Institute in effect
at the time of production.
•
Shut the machine off before unclogging, servicing, or
fueling.
•
Read and understand the contents of the manual before
you start the engine. Make sure everyone using this
product knows how to use the product and understands
the warnings.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Reorder part no. 112-6633
1. Fast
2. Forward speeds
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance from the snowthrower.
106-4525
3. Slow
4. Reverse speeds
107-3040
•
Do not put hands or feet near moving components on
the machine.
•
Do not operate machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance from the machine.
•
Keep children out of the operating area and under the
watchful care of a responsible adult other than the
operator. Never allow children to operate the machine.
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
3
112-6625