Table of Contents
Advertisement
6
Filling the Engine with Oil
No Parts Required
Procedure
Your machine comes with oil in the engine crankcase.
Note: Before starting the engine, check the oil level and
add oil if necessary.
Use automotive detergent oil with an API service classification
of SF, SG, SH, SJ, SL, or higher. Refer to your engine owner's
manual.
Use
Figure 18
below to select the best oil viscosity for the
outdoor temperature range expected:
Figure 18
Engine Oil Capacities
Model
38805
1. Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill
Engine Oil Capacity
0.53 to 0.59 L (18 to 20 oz)
(Figure
19). Refer to
(page
2. Install the dipstick securely.
Note: Do not spill oil around the oil fill tube; oil could
leak onto traction parts and cause the traction to slip.
7
Checking the Tire Pressure
No Parts Required
Procedure
The tires are overinflated at the factory for shipping. Reduce
the pressure equally in both tires to between 116 and 137
kPa (17 and 20 psi).
).
10
Figure 19
Hide quick links:
Advertisement
Table of Contents
