Security Setting - Riso HC5500 Series User Manual

Security Setting

Sets the scope of operation that can be executed in [Job manager].
~ ~ ~ ~ Items That Can Be Set from [Finished job storage]
If [Keep] is set, a printed job can be recalled and printed
again from the [Job status] tab of [Job manager]. Also
data can be stored or registered as a form in the printer
controller.
Not keep (initial setting)
Deletes finished jobs after printing.
Keep
Keeps finished jobs for a specified period or keeps a
specified number of jobs on the [Job status] tab of [Job
manager].
For specifying the method of deleting stored jobs, select
one of the following three items.
By age (hours)
Specifies hours for which a job is kept. Set the time at
the counter on the right. The time can be set from 1 to 99
hours.
~ ~ ~ ~ Items That Can Be Set from [Job information display]
Hide job names in Job status (excl. admin)
Sets whether or not job names (printed file names) are
displayed.
Hide storage job names/Thumbnail (excl.
admin)
Sets whether or not the stored job names and the thumb-
nail of selected storage data are displayed.
2-12
By age (days)
Specifies days for which a job is kept. Set the number of
days at the counter on the right. The number of days can
be set from 1 to 99.
By amount
Specifies the number of jobs that are kept. Set the num-
ber at the counter on the right. The number can be set
from 1 to 99.
The maximum number of finished jobs that can be
stored is 100. If this number is exceeded, the oldest job
is automatically deleted regardless of the setting of
[Finished job storage].