Scan Operation; Scan Types - Icom IC-M200 Instruction Manual

4

SCAN OPERATION

■ Scan types

You can find ongoing calls by scanning the channels.
NOTE: Before starting a scan
• Set the channels you want to scan as TAG channels.
(p. 10) (Only TAG channels are scanned.)
• Select the scan type from "Normal (default)" or "Priority."
(p. 13)
NORMAL SCAN
CH 06
A normal scan sequentially searches through all TAG
channels. However, Channel 16 is not checked unless it
is set as a TAG channel.
9 9
CH 01 CH 02
CH 03
CH 05 CH 04
PRIORITY SCAN
CH 01
CH 06 CH 16
CH 05
A priority scan sequentially searches through all TAG
channels while also monitoring Channel 16.
When a signal is received on:
• Channel 16: The scan pauses until the signal on
Channel 16 disappears.
• A channel other than Channel 16:
The scan switches to Dualwatch, until the
signal disappears.
CH 02
CH 03
CH 04