Pairing Your Device Via Bluetooth - iHome iBT38 Instruction Manual

Pairing Your Device Via Bluetooth

Whenever AC power is connected, the iBT38 will attempt to autolink to a previously paired device.
4. "iHome iBT38" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT38" to connect it. If prompted for a passcode, enter "1234" on your
device's keypad.
iHome iBT38
For iPhone
5. If pairing is successful, 2 beeps will sound and the BT icon
ready to play music. There should also be an indication on your device. If no device is successfully paired
within 3 minutes the iBT38 will default to previous mode. Once the iBT38 is paired to a device, it will
attempt to autolink when the device is within range (about 33 feet).
1. Turn on your Bluetooth device and make it "discoverable" by turning on Bluetooth
mode (check in Options or Settings).
2. Press the Button to turn on the iBT38. The first time the unit is powered on it will
enter pairing mode automatically. After this, you will need to pair using the Pairing
Button after powering on (see step 3 below).
3. Press and hold the
will beep and the BT
pairing mode.
iHome iBT38
Pairing Button on top of the iBT38 for 2 seconds. The iBT38
icon will flash on the display, indicating the iBT38 is in
For other
will appear solid, indicating the iBT38 is
10
Using the
iHome iBT38
iHome iBT38
iBT38