Using Bluetooth Pairing Your Device; Pairing With A Different Device - iHome Hello Kitty Si-B62 Instruction Manual

Snooze/Dimmer Button
1. While the alarm is sounding, press and release the Snooze/Dimmer Button to temporarily silence the
alarm for 9 minutes. Snooze can be used several times during alarm.
2. To adjust the brightness of the display from high to low, press and release the Snooze/Dimmer Button
during normal operation (when no alarm is sounding).
Sleep Mode
This unit allows you to sleep or nap to the current sound source.
When unit power on to set Sleep time, press and release the Sleep Button as needed to cycle to the desired
sleep
duration:120, 90, 60, 45, 30, 15, 10 minutes or OFF (turns the sleep mode off).
11
P12
Si-B62
Using the

Using Bluetooth Pairing Your Device

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device's user
manual.
2. Press and release the Power/Mode Button as needed until "bt" appears on the display and the red
indicator next to the Bluetooth icon flashes.
3. Press and hold the Pairing Button until bt flashes on the display and a beep sounds, indicating
pairing attempt. "HelloKittySi-B62" should appear on your device's menu. If "Not Paired", "Not
Connected" or similar message appears, select "HelloKittySi-B62" on the device to connect it. If your
device asks for a password, enter 1234 on the keyboard of your device. If no device is paired within
3 minutes, and the unit will revert to its previous mode. To retry pairing, turn the unit OFF then back ON,
then follow step 3 again.
4. Once paired with a device, the Bluetooth indicator on the display will appear solid as BT music playing
and the BT indicator will appear 1 flash/5 sec as no BT music playing. On some devices, you must then
select "Use as Audio Device" or similar on the device's Bluetooth menu. Once paired, your device should
link to the Si-B62 whenever within range (about 30 feet).

Pairing with a Different Device

When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.
13
P14
Si-B62
Using the