Unit Doesn’t Respond; Trouble Pairing Device/Computer With Ibt38; Troubleshooting - iHome iBT38 Instruction Manual

Unit doesn't respond (no sound)
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT38.
• Make sure the Power is ON.
• Make sure volume is up on your Bluetooth device and on unit.
Unit doesn't respond (locked up or frozen)
• The unit may need to be reset. To do so, unplug the unit from power source and remove the
backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power
source. You will need to reset the clock, radio, and any other settings.

Trouble pairing device/computer with iBT38

Bluetooth implementation varies depending on your device's hardware and operating system. Please see
our website for updates on pairing.
• When you power ON the unit, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (about 33 feet).
• Make sure your device is working properly. Check your device's manual for details on Bluetooth
pairing and linking.
• To clear all Bluetooth devices, press and hold the Bluetooth Button for 6 seconds when unit is not in
pairing mode. A long beep will sound and the current firmware version will appear on the display.
For further information and to see the latest instructions, visit www.ihome.com/support
14

Troubleshooting