Previewing Alarm/Turning Alarm On/Off - iHome iBT38 Instruction Manual

Setting and Using the Alarm (Continued)
4. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth, radio or tone.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is
Wake to Radio: Press the Alarm Button to confirm. Press the
to wake to, or press the – or + Buttons to tune in a desired wake to station.
Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons as needed to listen to
and to select one of the four built-in wake-to tones (1 - 4).
5. Press the Alarm Button to confirm the alarm source. The volume display will flash.
6. Press the or
separately from other volume settings.
7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the Alarm Button to view the current alarm time.
2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm
icon and a beep.
detected, the alarm will default to current Tone.
Buttons to adjust the alarm volume. Note that the alarm volume setting is stored
Using the
Presets Button to select an FM preset
7
iBT38