Using Bluetooth: Pairing Your Device; Pairing With A Different Device - iHome iBT31 Instruction Manual

Using Bluetooth: Pairing Your Device

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device's
user manual.
2. Press and hold the Pairing Button on top of the unit for 2 seconds until the
Bluetooth icon flashes on the display and a beep sounds, indicating pairing
attempt.
"iHome iBT31" should appear on your device's menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT31" on the device to connect it. If your device asks for a
password, enter 1234 on the keyboard of your device. If no device is paired within 2 minutes, a tone
will sound and the unit will revert to its previous mode. To retry pairing, turn the unit OFF then back ON,
then follow step 2 again.
3. Once paired with a device, the Bluetooth icon indicator on the display will stop flashing. On some
devices, you must then select "Use as Audio Device" or similar on the device's Bluetooth menu. Once
paired, your device should link to the iBT31 whenever within range (about 30 feet).

Pairing with a Different Device

When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as
long as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.
Using the
11
P12
iBT31