Pairing Your Device Via Bluetooth - iHome iBT290 Instruction Manual

Pairing Your Device Via Bluetooth

Whenever AC power is connected, the iBT290 will attempt to autolink to a previously paired device.
1. Turn on your Bluetooth device and make it "discoverable" by turning on Bluetooth
2. Press the
3. Press the Mode Button to cycle to Bluetooth mode, indictaed by "BT" on the
4. Press and hold the
5. If pairing is successful, "PAIRED will appear on the display,2 beeps will sound and the cabinet will flash
blue twice, indicating the iBT290 is ready to play music. There should also be an indication on your device.
If no device is successfully paired within 3 minutes the iBT290 will default to previous mode. Once the
iBT290 is paired to a device, it will attempt to autolink when the device is within range (about 33 feet).
mode (check in Options or Settings).
Button to turn on the iBT290.
display"
iBT290 will beep and "PAIR" will flash on the display, indicating the iBT290 is in
pairing mode.
"iHome iBT290" should appear in your device's Bluetooth menu. Select "iHome
iBT290" to connect it. If prompted for a passcode, enter "1234" on your device's
keypad.
Using the
Pairing Button on top of the iBT290 for 2 seconds. The
10
iBT290