Part Specifications - Omron NB3Q-TW00B Setup Manual

1 Part Names and Functions
1-2

Part Specifications

Touch Panel
Input operation can be carried out by means of the touch panel. By pressing the touch panel, the
screens can be switched, and the contact information can be transmitted to the host.
Do not use the input functions of the touch switch, etc. of the NB Unit, in applications
that involve human life, in applications that may result in serious injury, or for
emergency stop switches.
Never press more than two points on the touch panel of the NB Unit at a time.
Otherwise, it may activate a switch somewhere between the two points.
Precautions for Safe Use
• Do not press a touch switch with a force greater than 30N.
• Do not accidentally press the touch panel when the backlight is not lit or when the display does
not appear. Make sure of the safety of the system before pressing the touch panel.
• Confirm the safety of the system before pressing the touch panel.
• Do not use hard or pointed objects to operate or scrub the screen, or the surface of the screen
may be damaged.
• Signals from the touch switches may not be input if the switches are pressed consecutively at
high speed. Confirm each input before proceeding to the next one.
• Deterioration over time can cause the touch points to move. Calibrate the touch panel
periodically.
Serial Port COM1
• NB5Q/NB7W/NB10W-TW
Serial port COM1 is a 9-pin D-type socket port. This port supports RS-232C communication
function, making it connectable to a controller which features RS-232C function, and it can also be
used for downloading programs or debugging for the product.
The pins are defined as follows:
1-6
WARNING
B
Pins Signals I/O
1 NC -
2 SD O Sending data
3 RD I Receiving data
4 RS(RTS) O Request to send*
5 CS(CTS) I Clear to send*
6 DC+5V - DC+5V output (Max. current: 250mA)
7 NC -
8 NC -
9 SG - Signal ground
* Pins 4 and 5 are not used, thus not compliant with RS or CS functions.
NB-series Programmable Terminals Setup Manual(V107)
WWW.NNC.IR
Functions
-
-
-