Advertisement
Available languages
Available languages
track or disc playback repeat
•
To repeat a track, press rep button (18) ((12)
button on the remote control) once, symbol
«REP» will appear on the display.
•
To repeat all tracks on the disc press rep
button (18) ((12) button on the remote con-
trol) twice, symbol «REP ALL» will appear on
the display (5).
random playback
•
To repeat all tracks on the disc randomly
press raNDoM button (8) on the remote
control, symbol "RANDOM" will appear on
the display (5).
Note:
Activation of the repeat/random mode is
–
possible in «playback», «pause» and «stop»
modes.
To cancel the repeat modes press the corre-
–
sponding buttons until symbols «REP», «REP
ALL» or «RANDOM» disappear.
playback programming
You can program playback of maximum 20 tracks.
In the stop mode press tIMe/proG. but-
1.
ton (19) on the front panel of the device or
proGraM button (9) on the remote control
once, symbol of programming «PROGRAM»
and the number of memory cell "P01" will
appear on the display (5).
Choose the desired track by pressing 9 or
2.
: (baCK and NeXt on the remote control)
buttons.
To save the chosen track in memory press
3.
tIMe/proG. button (19) on the front panel
of the device or proGraM button (9) on the
remote control, after that the next memory
cell «P02» will appear on the display (5), and
you can save the next track (see point 2).
You can program up to 20 tracks, symbol
4.
"FULL" will appear on the display in case of
exceeding the number of memory cells.
To play all tracks on the disc in programmed
5.
order press play/paUSe button (17) on the
front panel of the device (button (2) on the
remote control).
To cancel the programmed playback mode,
6.
press Stop < button (16) (or (3) button on
the remote control), open the CD compart-
ment lid (7) or press FUNCTION button (to
switch to another playback mode).
Note: Repeat playback functions are available in
programmed playback mode.
playback of Mp3 disc and files from USb
flash drive
This device can playback most types of MP3 files,
but sometimes a file can't be read because of
software settings used during the disc recording
(e.g., no disc finalization).
Connect the device to the mains.
1.
Press poWer button (3) on the front panel
2.
of the device or (1) button on the remote
control.
Insert the USB flash drive into the socket (6)
3.
or insert the MP3 disc with label up and close
the lid (7).
Press FUNCtIoN button (9) on the front
4.
panel of the device or (13) button on the
remote control consecutively to select the
MP3 disc or USB flash drive playback mode.
After reading the information from the USB
5.
flash drive or MP3 disc the total number of
folders «F» and total number of tracks will
be displayed, then playback of the first track
from the first folder will start. The playback
4
symbol «PLAY
(5), the track number will alternate with the
folder number; «MP3» format will be shown in
the upper part of the display.
If the inserted MP3 disc is damaged or the
6.
information on the USB flash drive cannot be
read, symbol «no» will appear on the display
(5).
playback
•
In the stop mode press play/paUSe button
(17) on the front panel of the device ((2) but-
ton on the remote control), disc playback will
begin, the playing track number and symbol
4
«PLAY
», will appear on the display (5) and
«MP3» format will be shown in the upper part
of the display.
•
Use the buttons p-Up and p-DoWN to
switch to the next/previous folder on the MP3
disc or USB flash drive.
pause
•
To pause the playback press play/paUSe
button (17) ((2) button on the remote con-
trol), symbol «PLAY
the display (5) and track playback time will
appear.
7
ENGLISH
» will appear on the display
4
» will be flashing on
Advertisement
