Table of Contents
Advertisement
Service Manual
Model No: 26A SERIES
4.1.4 Display screen
Function
7
Child-lock indicator To activate the Child-lock function after a cycle
1
Clean filter
2
indicators
3
Empty tank
indicator
4
indicator
5
Display
6.Process indicator:
3
1
4
2
ECO
Selection
Dry Level
Mode
8
9
10 11
has been started, press the
has been started, press the Fu
buttons for 3 sec. until the indicator icon lights up.
To deactivate press both buttons for 3 sec. again.
Note: When the cycle ends or the power
supply is interrupted, the function will not be
cancelled automatically.
Filters must be cleaned regularly.
See Lint Filter Cleaning or Condenser
Filter Cleaning section of the manual.
Note: When the indicators light during the
cycle, the drum lamp will be on too.
Water tank must be emptied.
Important: Empty the water tank after each
drying cycle. See Empty the water tank section
of the manual.
Memory mode is set or you have activated the
memory cycle.
The display shows the remaining time, the delay
time and other related information.
The remaining time.
The delay time.
Note: The remaining time is a default value,
this time will be re-calculated depending on
additional program settings and the moisture
content of the laundry.
The drying process(drying, cooling
and the end of cycle).
5
Timer
emo
12
nction & Selection
- 11 -
Issue
Rev.
6
Hide quick links:
Advertisement
Table of Contents
