Haier HD80-26A Service Manual page 12

Service Manual
Model No: 26A SERIES
4.1.5 Function button
7/8 Function and Selection button
There are 4 functions you can choose
Function and Selection are a couple of buttons.They should be selected together.
Press the function button to select one function you need-corresponding indicator
icon is flashing,then press Selection button-corresponding icon lights up. You have
finished the function setting. Use the same method continue to select other function
as you need.
Note: Not all the funcions can be selected for different program.
Signal function, you can choose it as you need.
Delay function for delay start, turn the knob to theright to set time (in 1 intervals up
to 19 hours).The appliance shoule be finished in, after wardspress
delayed operation.
Note: This function should be set after you have finished program selection,
other wisewhen you turn the knob, the function will be delected automatically.
Delicate function for delicate fabrics. It lowers the temperature and lengthens the
drying cycle time to take better care of the laundry.
Anti-Crease function to lengthen the automatic anticrease phase at the end of each
program by 60 minutes.
Note: The laundry can be removed at any time during the anti-crease phase.
9 Dry level button
10 Mode button
11 Timer button
12 M emo
Press the button to set the final moisture content
of the laundry at the end of cycle.
Extra dry.
Ready to wear.
Ready to iron.
Press the button to set the drying mode after you
have selected one program.
To save enery during a prolonged drying time.
ECO
For drying in a shorter time at a higher level of
energy consumpution.
A balance of drying time and enery
consumpution between "
Cool air.
Set timer program, the default time is 20 min,
turning the knob to the right to add the time and
left to subtract it. The shortest time is 10 min and
the longest time is 150min.
Press the button for 2 sec to memory the cycle
you want, at the same time the indicator
light up. The next time, when you want to use the
stored cycle you just only touch the
The indicator
lights up and the stored cycle is
activated.
Note: The " Delay function
memoried.
-12 -
Issue
Rev.
.
to start the
" and " ".
ECO
will
emo button.
M
" can not be