Haier HD80-26A Service Manual page 34

Service Manual
Model No: 26A SERIES
Service Self-Test Mode
When the dryer is running, press "Function" and " M emo " together for 8 seconds. The screen will
display the humidity value in the drum. You can check other information by pressing other button.
Order Operation
1
Pressing "Dry Level" button
2
Pressing "mode" button
3
Pressing "Timer" button
4
Pressing " M emo " button
Display and action
The screen will display the humidity value in the drum.
The screen will display the temperature value of NTC2 and NTC3.
For example the screen display "26 d028". And the temperature
of NTC2 is 26 , NTC3 is 28 .
The screen will display the station of water level switch and door
switch. For example: 01
Water level switch is not working. There's no water under the waterlevel
switch.
The door is close.
The screen will display the station of motor, compressor, fan and pump.
For example: 1101
Motor is on, compressor is on, fan is off, pump is on.
-34 -
Issue
Rev.