Troubleshooting - Bosch ART COMBITRIM 23 Original Instructions Manual

OBJ_BUCH-2342-003.book Page 14 Tuesday, March 8, 2016 1:21 PM
14 | English
Mounting and Operation
 Do not connect the machine to the mains socket before
it is completely assembled.
 The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching "on" again.
 Do not rapidly switch off and on.
 Do not hand bump the line feed as it could be hot.
 Remove any grass from spool cover when changing line
or spool.
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
 Use the original spring when replacing spool.

Troubleshooting

Problem
Blade guard can not be mounted over
cutting disc
Trimmer fails to operate
Trimmer runs intermittently
Garden product labours
Machine does not cut
Line can not be fed
Line keeps breaking
F 016 L81 549 | (8.3.16)
Action
Delivery Scope
Mounting the Cutting Guard
Mounting wheels
Mounting the line spool
Adjusting the Handle
Adjusting the Cutting Height
Connecting the extension lead
Switching On and Off
Setting Handle Angle
Working Advice
Bump feed
Maintenance, Cleaning and Storage 13
Selecting Accessories
Possible Cause
Incorrect assembly
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Extension cable damaged
Internal wiring of machine damaged
Grass too high
Cutting line too short/broken off
Spool empty
Line inside the spool entangled
Line inside the spool entangled
Trimmer used incorrectly
Figure Page
1 192
2 193
3 193
4 193
5 194
6 194
7 195
8 – 9 195 – 196
10 – 11 196 – 197
12 197
197
14 198
Corrective Action
Remove cutting disc and mount blade
guard again; also see "Mounting"
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Service Agent
Contact Service Agent
Cut in stages
Replace cutting line
Replace the spool
Inspect the spool, replace if necessary
Inspect the spool, replace if necessary
Only trim with the tip of the line, avoid
stones, walls and other hard objects.
Feed the line regularly to maintain full
cutting width.
Bosch Power Tools