Changing The Photoconductor Kit - Lexmark E 250d User Manual

Changing the photoconductor kit

Warning: When replacing a photoconductor kit, do not leave the new photoconductor kit exposed to direct light
for an extended period of time. Extended light exposure can cause print quality problems.
1
Turn the printer off.
2
Remove the print cartridge assembly.
a Press the button on the left side of the printer to release the front door.
b Lower the front door.
c Grasp the toner cartridge handle, and pull up and out.
Note: Do not press the button on the print cartridge assembly.
Place the print cartridge assembly on a flat, clean surface.
Changing the photoconductor kit
1
2
3
82