Ordering A Photoconductor Kit; Ordering A Maintenance Kit; Replacing Supplies; Replacing The Toner Cartridge - Lexmark Monochrome Laser Maintenance Manual

Part name
Extra High Yield Toner Cartridge

Ordering a photoconductor kit

The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a
photoconductor kit. You can also see the status of the photoconductor kit by printing a network setup page.
Part name
Photoconductor kit

Ordering a maintenance kit

80 Routine maintenance needed appears on the display after 120,000 pages have printed to let you know it
is time to replace printer maintenance items. Order a maintenance kit when this message first appears. The maintenance
kit contains all the items necessary to replace the fuser and transfer roller.
Notes:
•
The maintenance kit may not be available in all geographies.
•
Using certain types of paper or specialty media may require more frequent replacement of the maintenance kit.
See the following table for the maintenance kit part number for your printer:
Part name
Maintenance kit
* Designed for use only in Japan

Replacing supplies

Replacing the toner cartridge

When 88 Cartridge low appears, or when you experience faded print, remove the toner cartridge. Firmly shake
it side‑to‑side and front‑to‑back several times to redistribute the toner, and then reinsert it and continue printing.
When shaking the cartridge no longer improves the print quality, replace the toner cartridge.
Note: You can check to see approximately how much toner is left in your cartridge by printing a menu settings page.
Lexmark Return Program Cartridge
E462U11L
Part number
40X5402 (100 V)*
40X5400 (115 V)
40X5401 (230 V)
Maintaining the printer
5
Regular cartridge
E462U21G
Part number
E260X22G