Printing From A Macintosh Computer - Lexmark 21S0150 - E 321 B/W Laser Printer Reference

Now print the envelope:
1
Load an envelope vertically, flap side down, with the stamp area in the top left corner in the
manual feed.
2
From the File menu, select Print (or Printer) Setup to open your printer driver.
3
In the Print Setup box, click Properties, Options or Setup (depending on the application) and
select the size envelope you want from the Paper Type setting.
4
Change Orientation to Landscape.
5
In the Print dialog box, click OK to send the job to print.
Note: To change printer settings not available from your printer driver, install the Local
Printer Setup Utility from the drivers CD (see
Utility).
If you need an explanation about a printer setting, help is just a click away:
•
Click the Help box in the bottom right corner of any dialog box.
•
Move your cursor to the setting in question and press F1 or right-click your mouse.

Printing from a Macintosh computer

For example, you want to print a letter on letterhead paper and an envelope:
1
Load letterhead with the top of the page pointing down facing you in tray 1.
2
From your software application, open the file you want to print.
3
From the File menu, select Page Setup to open your printer driver.
4
Verify the correct printer is selected in the dialog box.
5
Select Letterhead from Paper and then click OK.
6
Click Print from the File menu to send the job to print.
Now print the envelope:
1
Load an envelope vertically, flap side down, with the stamp area in the top left corner in the
manual feed.
2
From the File menu, select Page Setup.
Using the Local Printer Setup
15