Identification Command (2Bh) - Toshiba TOSVERT VF-nC3 Instruction Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc

5.1.7. Identification command (2BH)

Computer → Inverter *The text size is 7 bytes fixed.
Inverter
Command
No.
2B
(fixed)
1) Inverter No. (1 byte)
2) Command (1 byte)
3) Type of MEI (1 byte)
4) Read Device ID (1 byte)
5) Object ID (1 byte)
6) CRC16 (2 bytes)
Inverter → Computer (Normal return) *The text size is variable.
Read De-
Inverter Com- Type of
No. mand MEI
2B 0E
(fixed) (fixed) (variable)
------ Id of object no.1
00
(fixed)
------ Id of object no.2
01
(fixed)
------ Id of object no.3
02
(fixed)
------ CRC16
low high
The total responce size is variable.
The three objects contained in the responce correspond to the following objects:
Object no.1: Manufacturer name ("TOSHIBA").
Object no.2: Device reference (ASCII string ; ex. :" VFｎC3-2007PL"). note) See Appendix 3.
Object no.3: Device version (4-byte ASCII string; for example: "0510" for version 510).
Type of Read
Object ID
MEI device ID
0E 00-03
(fixed) (variable) (fixed)
: ---
: Set the Identification command (2BH fixed).
: 0EH fixed.
: 00-03H
: 00H fixed.
: ---
Number of
Degree of
vice additional
conformity
Id frames
00-03 01 00
(fixed) (fixed)
Length of object no.1
07
(fixed)
Length of object no.2
0C
(variable)
Length of object no.3
04
(fixed)
CRC16
low high
00
Next Number of
object Id objects
00 03
(fixed) (fixed)
Value of object no.1
"TOSHIBA"
(fixed)
Value of object no.2
"VFｎC3-2007PL"
(variable)
note) See Appendix 3.
Value of object no.3(4 bytes)
"0510"
(variable)
36
E6581657
-----
-
------
------
------