en | Troubleshooting
28
6
Troubleshooting
6.1
Troubleshooting Tips
Before sending the camera out for repair, check the items
below. If the problem persists after checking these items,
contact your service center.
- If no image appears, verify that:
–
The coaxial cable is attached securely.
–
The power and voltage are normal.
–
The iris of the lens inside the camera was adjusted
correctly (with the level volume).
–
There is adequate illumination.
- If the image is unclear, verify that:
–
The lens is in focus.
–
The lens is not dirty. Dirt or fingerprints on the lens can
adversely affect the images. Gently wipe any dirt or
fingerprints off the lens with a soft cloth or lens cleaning
paper and cleaning fluid (available commercially).
–
The monitor is adjusted correctly.
| 1.0 | 2011.02
Installation Manual
Integrated IR Bullet Camera
Bosch Security Systems, Inc.