Configuring Settings With The Dip Switch - Bosch WZ20 Installation Manual

en | Configuration
20
4.1.4

Configuring Settings with the Dip Switch

The figure below displays the numbers on the dip switch on the
bottom of the WZ20 camera. The table below the figure
identifies the function of each switch, and the setting of each
function with the dip switch on or off.
Figure 4.4 Dip switch on WZ20 camera
Number Function Setting ON Setting OFF
1
2
3
4
1. Select the appropriate dip switch for the function that you
want to set.
2. Set the dipswitch ON or OFF, depending on the desired
setting of the function.
| 1.0 | 2011.02
BLC ON
Lens FIX
AWB AWC
AGC ON
Installation Manual
Integrated IR Bullet Camera
OFF
ATW
OFF
Bosch Security Systems, Inc.