Timing / Storing And Retrieving Lap Times - Auriol Z29592 Operation And Safety Notes

Before using it for the first time, the stopwatch will read 0.
Press the MODE button
CHR appears in the display
Press the ST. / STP. button
Press the button again to stop the stopwatch.
The display
5
and stop.
If you press the ST. / STP. button
continue to run again.
Press the RESET button
stopwatch display to 0 again.
Note: With time measurements longer than one hour,
the hours, minutes and seconds are indicated in the time
display.
©
Timing / storing and
retrieving lap times
Timing and storing lap times
You can time and store up to 10 lap times.
Press the MODE button
CHR appears in the display
Press the ST. / STP. button
as often as necessary until
2
.
5
to start the stopwatch.
4
will indicate the time between start
4
for 2 seconds to reset the
1
as often as necessary until
2
.
5
to start the stopwatch.
4
again, the time will
GB/CY 19