Exiting From Examination - Olympus oep-4 Instructions Manual

CAUTION
The image of the print stored in the flash memory is
overwritten each time paper jam occurs. If image data is
overwritten, you cannot print the image data stored
before the paper jam occurred.
1
Press the power switch to turn ON.
2
When message "RESTORE IMAGES? YES/NO"
is displayed on the monitor and the LCD panel,
press the "b" or "B" button to select "YES" and
press the EXEC button.
NOTE
If "NO" is selected in step 2, refer to "Setting
"STORE IMAGE"" in "5.15 Setup of the
FUNCTION SETUP Menu" in "INSTRUCTIONS
(ADVANCED)" to restore and print the image
manually.
3
Message "READING IMAGES" is displayed on
4
the monitor and the LCD panel. And then the
display returns to the normal display.
4
When image readout completes, message
"RESTORE FINISHED" is displayed on the
monitor and the LCD panel.
5
Select the memory page where images that you
want to print are stored.
6
Press the PRINT button to start printing.
NOTE
When you control the printer from the EVIS EXERA
video system center (CV-160) or the EVIS video system
center (CV-240 or CV-140), change the memory page or
print images using the keyboard of the connected
equipment.
For details, refer to the instruction manuals of the
connected equipment.
In only case other than the cases above, see "Selecting
the Memory Page" and "Printing" in "4.2 Control From
the Front Panel" in "INSTRUCTIONS (ADVANCED)."
28

4.4 Exiting from Examination

4.4 Exiting from
Examination
CAUTION
When this instrument is controlled from connected
equipment, the captured images will not be printed
automatically until their number reaches the set number
of multi-picture images. Confirm that there are no
unprinted images in the memory pages before turning
this instrument OFF. Once this instrument is turned
OFF, all of the images captured in the memory pages are
cleared and cannot be printed.
1
Display the memory image on the monitor, and
confirm that there are no images left unprinted in
memory page.
If there is any, print them.
2
After printing is completed, turn the color video
printer (OEP-4) OFF.