Olympus oep-4 Instructions Manual page 16

4
Set a new ink ribbon on the ink ribbon holder.
Hold the ink ribbon right and remove the gear cover
(see Figure 3.5).
Gear cover
CAUTION
3
Do not touch the surface of the ink ribbon for longer
than is necessary. Do not leave it in a dusty
environment. If smudges or dust attach to the ink
ribbon, printing will not only be incorrect but also
damage to this instrument may occur.
5
In first, fit the white gear into the ink ribbon, next
fit the gray gear into the ink ribbon (see Figure 3.6).
16
3.2 Installation of the Color Printing Pack (UPC-55)
Figure 3.5
Gear (White)
Caution label
m
Gear (Gray)
Caution label
Figure 3.6
NOTE
Also refer to the caution label on the ink ribbon
holder.
6
Turn the gears in the arrow direction until the
magenta section of the ink ribbon appears all over
to remove slack from the ink ribbon (see Figure
3.7).
Magenta section
Figure 3.7
NOTE
Also refer to the caution label on the ink ribbon
holder.
7
Push the ink ribbon holder all the way into the color
video printer (OEP-4) (see Figure 3.8).
Figure 3.8
WARNING
Do not insert or put something except ink ribbon
holder into the paper exit. Otherwise, damage may
result, furthermore fire and/or electric shock may
result.
CAUTION
Push the ink ribbon holder into this instrument
straight and level. If you push the ink ribbon holder
in at a slant, the ink ribbon may be torn, or this
instrument and/or the ink ribbon holder may cause
damage.
Gears
Caution label