In The Case Of A Paper Jam; Removing The Jammed Paper Sheet - Olympus oep-4 Instructions Manual

4.3 In the Case of a
Paper Jam
If paper jam occurs in the middle of printing, correct it
as described below.
The flash memory is built into this instrument to store all
of the image data stored in the memory pages and all of
the current settings of this instrument, in case the print
sheet jams unexpectedly. When the power of this
instrument is turned OFF, image data stored in the
memory pages is cleared. However, data stored in the
flash memory will not be cleared even if the power is
turned OFF.

Removing the Jammed Paper Sheet

When paper jam occurs, message "SAVING IMAGES.."
is displayed together with the error message, and the
images captured in this instrument are stored together
with the menu setups in the flash memory. When these
4
message have disappeared, remove the jammed paper in
the following steps.
CAUTION
Do not turn OFF this instrument during the message is
displayed. If the power is turned OFF, a image data is not
only saved in the flash memory, but damage may result.
1
Press the power switch to turn OFF (see Figure 4.2).
Power switch
26

4.3 In the Case of a Paper Jam

Figure 4.2
2
Push the PUSH EJECT area on the paper tray and
take out the paper tray (see Figure 4.3).
Figure 4.3
3
Remove the jammed paper sheet (see Figure 4.4).
Figure 4.4
CAUTION
Do not reuse the removed print sheet. Paper jam
may occur.
4
Confirm that the print sheets correctly on the paper
tray.
If not, place the print sheets correctly on the paper
tray.
5
Install the paper tray.
If the jammed paper is not removed in the
above-mentioned procedure
1
Besure to turn OFF the power, and disconnect the
power cord and other connecting cables.
2
Remove the ink ribbon cartridge and the paper tray
from the color video printer (OEP-4) and then turn
the color video printer (OEP-4) upside down.