Connection Of The Visera Video System Center (Otv-S7V) - Olympus oep-4 Instructions Manual

2.3 Connection of the VISERA Video System Center
(OTV-S7V)
To a monitor
To Y/C input terminal of
a monitor
2
VIDEO OUT
terminal
NOTE
• It can be used if any one of an RGB cable, a Y/C cable,
and the BNC cable is connected between this
instrument and VISERA video system center (OTV-
S7V).
12

2.3 Connection of the VISERA Video System Center (OTV-S7V)

Color video printer (OEP-4)
REMOTE 2
terminal
OEP cable (MH-987)
BNC cable (MB-677)
Y/C RGB OUT
terminal terminal
S VIDEO
VIDEO IN
IN
terminal
terminal
Y/C cable (MH-985)
RGB cable (MH-984)
H.COPY
terminal
Figure 2.3
• Refer to the instruction manual of VISERA video
system center (OTV-S7V) for connection of VISERA
video system center (OTV-S7V) and the monitor.
S VIDEO
OUT
terminal
S B
Y/C cable
VISERA Video System Center (OTV-S7V)
INPUT
terminal
G R