3.3 Setup Of The Connected Equipment - Olympus oep-4 Instructions Manual

3.3 Setup of the Connected Equipment

This document, "INSTRUCTIONS (BASIC)," explains
the EVIS EXERA video system center (CV-160) and the
VISERA video system center (OTV-S7V).
Refer to the instruction manuals of the connected
equipment and set them up as required for use with this
instrument.
Refer to "INSTRUCTIONS (ADVANCED)" when you
use equipment other than the equipment introduced in
"INSTRUCTIONS (BASIC)."
Table 3.1
Connected Device Instruction Manual
References
CV-160 "6.9 Image recording and
playback"
"Using a video printer"
"Operation from the
keyboard"
"5.3 System setup"
"Printer settings"
"5.4 User presets"
"Setting [User Preset –
Edit Data] menu"
"Setting endoscope
remote switch functions"
OTV-S7V "5.12 Remote control
switches"
"5.13 Setting a function
to the keyboard"
Setup Item Setup
"#PER PAGE" switch on From "1," "2," "4",
the keyboard. "N"
"PRINT QTY." switch on From "1," "2," "3",
the keyboard. "N"
"Type" "OEP3"
"Qty. "N"" "4" – " 9"
"Caption" Max. 40 characters.
"Scope remote switches" "Printer"
"Switch 1" "P.Back"
"Switch 2"
"Switch 3"
"Switch 4"
Remote control switch on "REL.+DIG. CAP."
the videoscope or camera "RELEASE"
head
"F4" key "REL.+DIG. CAP."
"RELEASE"
Note
Select the number of multi-
picture images. Select any one
except "16."
Set the number of print quantity.
Print quantity is set up from a
menu when it is set as "N,"
according to "Printer settings" in
"5.3 System setup." Select any
setting.
Select the printer type. Be sure to
set "Type" to "OEP3" when using
this instrument.
Select the print quantity when the
"Print quantity indicator" on the
keyboard is set to "N." Select any
setting, as required.
Input the characters to be printed
in the margin of print sheet.
Select the functions to be
controlled from the scope
switches on the videoscope or
OES video converter. Select any
setting, as required.
Select the function to be
controlled from the remote
control switch on the videoscope
or camera head. Select any
setting, as required.
Select the function to be activated
with the "F4" key on the
keyboard. Select any setting.
Input them, as required.
3.3 Setup of the Connected Equipment
3
19