Table of Contents
Advertisement
1
Insert the SFP into the integrated services platform with the optical connector facing out and the
slot connector facing down.
2 Press the transceiver into the slot until it clicks into place.
Note
Only install 10Gb SPF+ transceivers in 10Gb NMC modules and 1Gb SPF transceivers in 1Gb
NMC modules.
NX-7530 Integrated Services Platform Disc Drive Assembly
Replacement
Warning
Power down the integrated services platform and disconnect all power cords prior to
installing or replacing the disc drive.
The NX-7530 integrated services platform configuration includes a hard drive disc assembly and
Redundant Array of Independent Disks (RAID).
To replace a disc drive assembly:
1
Remove power from the integrated services platform.
2 Press the release button on the right side of the disc drive assembly to release the assembly lock.
NX-7500 Series Integrated Services Platform
Hardware Installation
15
Advertisement
Table of Contents
