Table of Contents
Advertisement
Installing the Appliance into a Rack
A rack mounting kit and Installation Guide are included with the PV-A-300 appliance. The
rack mounting kit allows you to install the appliance into a four-post rack cabinet. Refer to
the Installation Guide for complete installation instructions.
If you are installing the appliance in a rack:
1 Install the rack handles by aligning a rack handle with the two holes on each the side of
the appliance and attaching each handle to the appliance with two screws as shown in
Figure
3.
Figure 3: Installing the Rack Handles
2 Read the Installation Guide included with the rack mounting kit.
3 Install the rails and mount the controller in the rack as instructed.
If you are table mounting the appliance, ensure at least 6 cm of clearance on all sides of the
appliance for proper ventilation.
Torque Values
The following table describes the recommended torque values to use when installing the
appliance using standard threaded fastener machine screws and bolts.
Table 8: Recommended Torque Values by Screw Size
Screw Size
English
N/A
2 – 56
4 – 40
6 – 32
8 – 32
10 – 32
1/4 – 20
Purview PV-A-300 Appliance Installation Guide
Torque in Pounds
Metric
-%5
N/A
1.42
1.5
2.85
2.5
4.75
3.5
8.55
4.5
17.10
5
30.40
6.5
63.65
Installing the Appliance into a Rack
Nominal
+%5
1.5
1.57
3.0
3.15
5.0
5.25
9.0
9.45
18.0
18.90
32.0
33.60
67.0
70.35
Bit Size
0
0
0/1
1
2
2
3
11
Hide quick links:
Advertisement
Table of Contents
