Power Supply Status Indicator Patterns - Extreme Networks Purview PV-A-300 Installation Manual

Table 6: RJ45 Port LEDs (Management Port)
LED Type
Network Speed (Right)
Link Activity (Left)

Power Supply Status Indicator Patterns

The appliance has two power supplies, supplying hot-pluggable power redundancy. The
system distributes the power load across both power supplies to maximize efficiency.
Each power supply has a single bi-color LED to indicate power supply status, as described
in Table 7.
I
Table 7: Power Supply Status LED Indicator Patterns
Power Supply Condition
Output on and OK
No AC power to all power supplies
AC present / Only 12VSB on (PS off) or PS in cold redundant state
AC power cord unplugged or AC power lost. With a 2nd PS in parallel
still with AC input power
Power supply warning events where PS continues to operate — high
temp, high power, high current, slow fan
Power supply critical event causing a shutdown, failure, OCP, OVP, fan
fail
Power supply firmware updating
Purview PV-A-300 Appliance Installation Guide
LED Pattern
Off
Amber
Green
Off
Solid Green
Blinking Green
Power Supply Status Indicator Patterns
Status Indication
10 Mbps
100 Mbps
1000 Mbps
No link
Active link
Data traffic activity
LED Pattern
Green
Off
1Hz Blinking Green
Amber
1Hz Blinking
Amber
Amber
2Hz Blinking Green
9