Alarm State - Vivotek NR9581 User Manual

For example, you can set up a filter to display the alarms with a name associated with a specific
camera, such as "bullet on the corridor." The name of the alarm is configured in Configuration
> Alarm management on page 139.
Use the Filter tab at the bottom of the Alarm window to display a different sorted result.

Alarm State

Left-click to select an alarm, and then right-click to display the Update Alarm button.
You can change the alarm state from the pull-down menu. For example, if someone has already
been sent to check out the situation, for example, an intruder broke in through a window, you
can select the Assigned status. A 1024 bytes decription can be added into the alarm Note for
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
future reference.
I f a n a l a r m i s p r o v e d a s a
f a l s e a l a r m , t h e a l a r m c a n
b e d e si g n a t e d a s Ig n o r e o r
Resolved, and so on.
The different alarm states can
also be used as the filtering
conditions in the Alarm filter.
Single or multiple states can
be selected in the filter. For
example, to display the Resolved
alarms only, use the Resolved
state as the filter.
User's Manual - 77