General Settings; System Settings - Vivotek NR9581 User Manual

General Settings

This section allows you to configure the System Settings and Rotation Settings.

System Settings

Auto login after logging in to operating system: If you check this option, VAST LiveClient will

automatically login after you login to Windows without filling in the user name and password. This
function is disabled as default.
Automatically display in full screen after login: If you check this option, the video cells will be displayed

in full screen without showing the menu bar or the control panels.
Auto add newly-inserted camera to video cell: If you check this option, VAST LiveClient will

automatically add the newly-inserted device to a video cell. This function is enabled as default.
Retrieve RTSP streaming on specific port: The default port for RTSP streaming is 4543. If you want to

change this port, please check this item and fill in a desired port number.
Setup substation streaming via relay: This option is not checked by default. As the following diagram

shows, VAST Client might directly connect to the streaming under VAST Server 3-2 without requesting
the connection via VAST Server 1 and Server 2-1. If you want to get streaming through relaying,
please check this option.
VIVOTEK IP Camera VIVOTEK IP Camera
VIVOTEK IP Camera VIVOTEK IP Camera
If the VAST Server 3-2 is set up behind a firewall, the VAST Client will not be able to access the VAST Server 3-2

directly. You have to get the connetion by relaying.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
VAST
Client
VAST
Server 2-1
ST7501
Server 3-1 Server 3-2
VIVOTEK IP Camera VIVOTEK IP Camera
VAST
Server 1
manages 2 sub-stations
VAST ST7501
Server 3-3
VIVOTEK IP Camera VIVOTEK IP Camera
VAST
Server 2-2
ST7501
Server 3-4
VIVOTEK IP Camera VIVOTEK IP Camera
User's Manual - 209