Insert Sub-Stations - Vivotek NR9581 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Insert Sub-stations

Please follow the steps below to add sub-stations:
a. Select a target station from the hierarchical management tree.
b. Click Configuration > Station Management on the menu bar (or right-click the target station, then
select Station Management).
c. The Station Management window will pop up. The hierarchical management tree managed by the
target station will be displayed on the left panel.
a
c
d. Before inserting the sub-station, you can click List Sub-station Hierarchy button to know if there is
any sub-station under it.
e. Enter the sub-station's IP address and Password (defined in Relay Settings, not login password).
The default communication port is 3454.
If the sub-station is on the LAN, you can click the Search Station button to detect all ST7501 and

VAST on the LAN. A Station List window will pop up and show a list of detected cameras on
the LAN. On the top of Camera List window, you can select "List the stations which are not
inserted" or "List all stations". The items listed below will then change accordingly. You can click
Name, IP Address, Model, Http port to sort the items. Then select a device from the list to insert
to the station.
124 - User's Manual
b
b