How To Configure Station Network Settings; Port Settings; Upnp Settings; Proxy Settings - Vivotek NR9581 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

How to Configure Station Network Settings

Select the target station from the hierarchical management tree, then click Configuration
> Station Settings > Network Settings on the menu bar (or right-click the station on the
hierarchical management tree and select Station Settings > Network Settings). The Network
Settings window will pop up.

Port Settings

Server port: The default server port is set to 3454. If you change

the server port, please enter the new value while logging the
LiveClient next time.
RTSP port: The RTSP (Real-Time Streaming Protocol) controls the

delivery of streaming media. By default, the port number is set to
4543.

UPnP Settings

Enable UPnP port forwarding: For client to access the VAST Server

from the Internet, select this option to allow the server to open ports
on the router automatically so the video streams can be sent out
from a LAN. To utilize of this feature, make sure that your router
TM
supports UPnP and it is activated.
Enable UPnP presentation: If you select this option, shortcuts to

VAST Server will be listed in My Network Places.

Proxy Settings

In this section, you can enable, modify, or cancel Proxy Settings for VAST Server if your network
devices are set up under a proxy.

Web Access Settings

User can access VAST LiveClient and Playback via Internet web browser
( ).
http://IP address:3454 F
Windows AD account information.
156 - User's Manual
or local host -->
http://127.0.0.1:3454. See page 132 for