Appendix A Panoramic Ptz (P-Ptz) Configuration; Enable Panoramic Ptz On Vast - Vivotek NR9581 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Appendix A Panoramic PTZ (P-PTZ)

Enable Panoramic PTZ on VAST

The process of configuring two cameras (1 fisheye and 1 speed dome) into the Panoramic
PTZ configuration takes place on a PC using the calibration tool. The Auto Tracking feature is
configured using a web console with the fisheye camera. A Panoramic PTZ package should
comprise two cameras running specific firmware for this application and a software CD
containing all necessary utilities. For configuration details, please refer to the Panoramic PTZ
Installation Guide.
360°
All round view
ref. point 1
ref. point 2
ref. point 3
ref. point 4
ref. point 5
ref. point 6
ref. point 7
ref. point 8
ref. point 9
ref. point 10
ref. point 11
ref. point 12
To exert Panoramic PTZ control on VAST:
1. Once these two cameras are configured into an interactive pair, insert these cameras into
your VAST configuration.
2. Select a preferred layout using the Layout
are specifically designed for the Panoramic PTZ configuration.
3. Taking the 1P+2 layout as an example, once they are listed on the device list, click and drag
the fisheye camera to the upper left and the bottom view cells. Place the speed dome in the
upper right view cell.
Fisheye 1O
288 - User's Manual
Configuration
Calibration tool
Mapping table
Pan/Tilt/Zoom
control
ref. point 1
ref. point 2
ref. point 3
ref. point 4
ref. point 5
ref. point 6
ref. point 7
ref. point 8
ref. point 9
Speed Dome
Fisheye 1P
ref. point 10
ref. point 11
ref. point 12
button. The 1P+2, 1P+6, and 1P+8 layouts