Additional printer setup
3
Remove the screws while holding the printer hard disk in place, and then remove the printer hard disk.
4
Set aside the printer hard disk.
Installing hardware options
Order of installation
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability.
You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex
unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP)
that scans, copies, and faxes, you may need additional furniture. For more information, see
www.lexmark.com/multifunctionprinters.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the wall outlet before continuing. If you have any other devices attached to the printer, then
turn them off as well, and unplug any cables going into the printer.
41