Lexmark x950 series User Manual page 176

Understanding the printer menus
Menu item
Content Source
Color Laser
Inkjet
Magazine
Press
Black/White Laser
Photo/Film
Newspaper
Other
Color
On
Off
Allow color copies
On
Off
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2 on 1 Portrait
2 on 1 Landscape
4 on 1 Portrait
4 on 1 Landscape
Print Page Borders
Off
On
Description
Specifies how the original document was produced
Note: Color Laser is the factory default setting.
Specifies whether copies are printed in color
Note: On is the factory default setting.
Lets you enable or disable color in copying
Notes:
•
On is the factory default setting.
•
Setting this to Off will hide all color‑specific menus.
•
This setting overrides the Color setting.
Sets the amount of color the printer can detect from the original document
Note: This menu item is applicable only when Color is set to Auto.
Specifies whether an original document is two‑sided or one-sided and whether
the copy should be two‑sided or one‑sided
Notes:
•
1 sided to 1 sided—The original document has print on one side and the
copy will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while
the copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while
the copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and
the copy will also have print on both sides.
Allows copying two or four sheets of a document on one page
Note: Off is the factory default setting.
Specifies whether a border is printed
Note: Off is the factory default setting.
176