Lexmark x950 series User Manual page 204

Understanding the printer menus
Menu item
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Print Settings
Menu item
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Color
Color
Black Only
Collate
On (1,2,1,2,1,2)
Off (1,1,1,2,2,2)
Sides (Duplex)
1 sided
2 sided
Description
Creates a mirror image of the original document
Note: Off is the factory default setting.
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness on a scanned image
Note: 3 is the factory default setting.
Enables the user to specify warm or cool outputs. Cool values generate a bluer
output than the default while warm values generate a redder output than the
default.
Description
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Sets a default paper source for all print jobs
Note: Tray 1 is the factory default setting.
Specifies whether copies are printed in color
Note: Color is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Specifies whether prints are on one side or on both sides of the page
Note: 1 sided is the factory default setting.
204