Image Mode Selection - Sanyo PLC-XU4000 Owner's Manual

Select the desired image mode among Dynamic, Standard,
Real, Cinema, Blackboard (Green), Colorboard, Image
1, Image 2, Image 3 and Image 4 by pressing the IMAGE
button on the remote control.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
Image select and then press the Point
SELECTbutton.
2
Use the Point
and then press the SELECT button .
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 42–43). This Image memory is
provided in each computer, component, S-video and video
input source.
Downloaded From projector-manual.com Sanyo Manuals

Image Mode Selection

Direct Operation
Menu Operation
buttons to select
▲▼
buttons to select the desired item
▲▼
Remote Control
IMAGE button
or the
►
Image select Menu
Video Input
IMAGE button
Dynamic
Standard
Real
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
41